Low Fuel Consumption SC220.8 Crawler Hydraulic Excavator from China Suppliers and Factory for Efficient Construction
| Technical specifications | Unit | Parameters |
|---|---|---|
| Working quality | (T) | 22.5 |
| Bucket capacity | (m³) | 0.4 |
| Engine model | - | 6BTAA5.9 |
| Power | （kw/r/min） | 133/2000 |
| Engine capacity | (L) | 5.9 |
| Number of engine cylinders | - | 6 |
| Engine emission standards | - | National Standard II |
| Whether it complies with national environmental protection certification | - | Conform |
| Fuel tank capacity | (L) | 350 |
| Walking speed (high/low) | (km/h) | 5.8/3.2 |
| Swing speed | (r/min) | 10.7 |
| Climbing ability | (°) | 35 |
| Bucket excavation force | (KN) | 75 |
| Arm digging force | (KN) | 60 |
| Ground specific voltage | (Kpa) | 45.2 |
| Traction force | (KN) | 174 |
| Hydraulic pump model | - | K3V112DT |
| Max displacement | (L/min) | 226*2 |
| Working pressure | (MPa) | 34.3 |
| Hydraulic tank volume | (L) | 246 |
| Overall size（mm） | SC220.8 |
|---|---|
| A - Total length | 11360 |
| B - Overall width | 2980 |
| C - Total height (boom top) | 3288 |
| D - Overall height (top of cab) | 3120 |
| E - Counterweight ground clearance | 1065 |
| F - Minimum ground clearance | 468 |
| G - Tail turning radius | 2969 |
| H - Track grounding length | 3445 |
| J - Track length | 4260 |
| K - Rail gauge | 2180 |
| L - Track width | 2980 |
| M - Track shoe width | 800 |
| N - Turntable width | 2700 |
| Arm length | 6356 |
| Boom length | 8260 |
| Scope of work（mm） | SC220.8 |
|---|---|
| O - Maximum excavation height | 12500 |
| P - Maximum unloading height | 10430 |
| Q - Maximum excavation depth | 11630 |
| R - Maximum vertical wall excavation depth | 10378 |
| S - Maximum excavation distance of 2.5m horizontal surface | 11525 |
| T - Maximum excavation distance | 15275 |
| U - Maximum excavation distance on the ground | 15160 |
| V - Minimum turning radius | 5356 |
| W - Maximum height at minimum turning radius | 9615 |
| X - Distance from the center of rotation to the rear end | 2969 |
| Z - Counterweight height | 2136 |
| A1 - Grounding length (during transportation) | 6550 |
Note: As products are constantly upgraded, Lishide will modify and adjust the product technical parameters, configuration and other information at any time without notice; therefore, this information is for reference only, and the product configuration, appearance, technical parameters, etc. shall prevail in kind.
The SC220.8 has a working quality (operating weight) of 22.5 tons and is equipped with a bucket capacity of 0.4 m³.
This excavator is powered by the 6BTAA5.9 engine model, featuring 6 cylinders and a rated power output of 133 kw at 2000 r/min.
The SC220.8 achieves a maximum excavation height of 12,500 mm and a maximum excavation depth of 11,630 mm.
Yes, the engine complies with the National Standard II emission requirements and conforms to national environmental protection certification.
The overall transport configuration has a total length of 11,360 mm, an overall width of 2,980 mm, and a total height (to the top of the boom) of 3,288 mm.