Powerful Hydraulic Excavator SC210.8 from China Suppliers - Reliable and Efficient Factory Equipment Solutions
| Technical specifications | Unit | Parameters |
|---|---|---|
| Operating quality | KG | 21,200KG |
| Bucket capacity | m³ | 0.9 |
| Engine model | Cummins | 6BTAA5.9 |
| Power | HP/min | 178/2000 |
| Engine capacity | L | 5.9 |
| Number of engine cylinders | - | 6 |
| Engine emission standards | - | National Standard II |
| Compliance with environmental certification | - | Conform |
| Fuel tank capacity | L | 350 |
| Walking speed (high/low) | km/h | 5.2/3.5 |
| Swing speed | r/min | 11.7 |
| Climbing ability | ° | 35 |
| Bucket excavation force | KN | 138 |
| Arm digging force | KN | 99 |
| Ground specific voltage | Kpa | 44.9 |
| Drawbar pull | KG | 17,743 |
| Hydraulic pump model | - | K3V112DT |
| Max displacement | L/min | 223*2 |
| Working pressure | MPa | 34.3/37.3 |
| Hydraulic tank volume | L | 246 |
| Overall size (mm) | |
|---|---|
| A - Total length | 9390 |
| B - Overall width | 2780 |
| C - Total height (boom top) | 3240 |
| D - Overall height (top of cab) | 3114 |
| E - Counterweight ground clearance | 1065 |
| F - Minimum ground clearance | 468 |
| G - Tail turning radius | 2720 |
| H - Track grounding length | 3260 |
| J - Track length | 4070 |
| Track Guage | 2180mm |
| L - Track width | 2780 |
| Triple Grouser width | 600mm |
| N - Turntable width | 2700 |
| Arm length | 2900 |
| Boom length | 5700 |
| Scope of work (mm) | |
|---|---|
| O - Maximum cutting height | 9.275m |
| P - Maximum unloading height | 6.515m |
| Q - Maximum digging depth | 6.562m |
| T - Maximum digging radius | 9.865m |
| U - Maximum excavation distance on the ground | 9680 |
| V - Minimum turning radius | 3630 |
| W - Maximum height at minimum turning radius | 7670 |
| X - Distance from the center of rotation to the rear end | 2720 |
| Y - Track tooth thickness | 26 |
| Electrical system | 24-volt |
| Sunshade all weather steel cap with safety glass | Standard Equipped |
Note: As products are constantly upgraded, Lishide will modify and adjust the product technical parameters, configuration and other information at any time without notice; therefore, this information is for reference only, and the product configuration, appearance, technical parameters, etc. shall prevail in kind.
Frequently Asked Questions (FAQ)
What engine is equipped in this Lishide excavator?
This excavator is powered by a reliable 6-cylinder Cummins 6BTAA5.9 engine, delivering a rated power of 178 HP at 2000 rpm with a displacement of 5.9 liters.
What is the operating weight and bucket capacity?
The machine has an operating weight of 21,200 KG and features a standard bucket capacity of 0.9 cubic meters (m³).
What are the maximum digging capabilities of this excavator?
It features a maximum digging depth of 6.562 meters, a maximum cutting height of 9.275 meters, and a maximum digging radius of 9.865 meters.
What hydraulic system configuration is used?
The excavator is equipped with a K3V112DT hydraulic pump, providing a maximum displacement of 223*2 L/min and operating at a working pressure of 34.3/37.3 MPa.
Does this equipment meet environmental protection standards?
Yes, the engine complies with National Standard II emission requirements and conforms to national environmental protection certification standards.