Powerful SC210.8 Hydraulic Excavator from China Suppliers - Reliable and Efficient Factory Equipment
Technical Specifications
| Technical Specifications | Unit | Parameters |
|---|---|---|
| Operating quality | KG | 21,200KG |
| Bucket capacity | m³ | 0.9 |
| Engine model | Cummins | 6BTAA5.9 |
| Power | HP/min | 178/2000 |
| Engine capacity | L | 5.9 |
| Number of engine cylinders | - | 6 |
| Engine emission standards | - | National Standard II |
| Compliance with environmental certification | - | Conform |
| Fuel tank capacity | L | 350 |
| Walking speed (high/low) | km/h | 5.2/3.5 |
| Swing speed | r/min | 11.7 |
| Climbing ability | ° | 35 |
| Bucket excavation force | KN | 138 |
| Arm digging force | KN | 99 |
| Ground specific voltage | Kpa | 44.9 |
| Drawbar pull | KG | 17,743 |
| Hydraulic pump model | - | K3V112DT |
| Max displacement | L/min | 223*2 |
| Working pressure | MPa | 34.3/37.3 |
| Hydraulic tank volume | L | 246 |
Overall Dimensions
| Overall Size | Parameters (mm) |
|---|---|
| A - Total length | 9390 |
| B - Overall width | 2780 |
| C - Total height (boom top) | 3240 |
| D - Overall height (top of cab) | 3114 |
| E - Counterweight ground clearance | 1065 |
| F - Minimum ground clearance | 468 |
| G - Tail turning radius | 2720 |
| H - Track grounding length | 3260 |
| J - Track length | 4070 |
| Track Guage | 2180mm |
| L - Track width | 2780 |
| Triple Grouser width | 600mm |
| N - Turntable width | 2700 |
| Arm length | 2900 |
| Boom length | 5700 |
Scope of Work
| Scope of Work | Parameters |
|---|---|
| O - Maximum cutting height | 9.275m |
| P - Maximum unloading height | 6.515m |
| Q - Maximum digging depth | 6.562m |
| T - Maximum digging radius | 9.865m |
| U - Maximum excavation distance on the ground | 9680mm |
| V - Minimum turning radius | 3630mm |
| W - Maximum height at minimum turning radius | 7670mm |
| X - Distance from the center of rotation to the rear end | 2720mm |
| Y - Track tooth thickness | 26mm |
| Electrical system | 24-volt |
| Sunshade all weather steel cap with safety glass | Equipped |
As products are constantly upgraded, Lishide will modify and adjust the product technical parameters, configuration and other information at any time without notice; therefore, this information is for reference only, and the product configuration, appearance, technical parameters, etc. shall prevail in kind.
Frequently Asked Questions (FAQ)
What engine powers this excavator?
This excavator is equipped with a Cummins 6BTAA5.9 engine, delivering a rated power of 178 HP at 2000 rpm with a displacement of 5.9 liters and 6 cylinders.
What is the operating weight and bucket capacity?
The machine features an operating weight of 21,200 kg and comes with a standard bucket capacity of 0.9 m³.
What are the maximum digging depth and reach limits?
The excavator reaches a maximum digging depth of 6.562 meters (Q) and has a maximum digging radius of 9.865 meters (T) on the ground.
What type of hydraulic pump system does it use?
It utilizes a K3V112DT hydraulic pump model, supporting a maximum displacement of 223*2 L/min and operating pressures of 34.3/37.3 MPa.
What are the overall transport dimensions?
The overall dimensions for transportation are 9390 mm in total length (A), 2780 mm in width (B), and 3240 mm in height to the top of the boom (C).
Does the machine meet environmental standards?
Yes, the engine complies with National Standard II emission requirements and conforms to relevant environmental protection certifications.