SC130.9 Small Excavator

CUMMINS ENGINE EQUIPPED HYDRAULIC EXCAVATOR

SC130.9 key hydraulic parts adopt Japanese Kawasaki and KYB, with excellent performance and good controllability, especially suitable for municipal engineering such as foundation excavation and pipeline construction.

Applicable working conditions.png

Engine power: 86KW/2200rpm
Machine weight: 13T
Bucket capacity: 0.53 m³

Product selling points

The Main Parameters

Product selling points

Energy saving and low consumption, ultra-high efficiency

Comfortable operation and humanized design

1. The newly designed positive pressure cab is equipped with full protection as standard, with large space and high safety. The sealing is 70% higher than that of the same level, effectively isolating dust and greatly reducing the noise in the cab;

2. The cab has a novel appearance, comfortable operation, wide field of vision, intelligent and humanized design;

3. The cab can be equipped with an anti-falling object protection frame and anti-falling object protection equipment, so that the operator can operate the machine with confidence in harsh working environments;

High-strength components----Structural parts box design, strong appearance

1. Structural parts are subjected to finite element analysis and heavy-duty reinforcement design, which increases the load-bearing capacity by 30% compared with the same tonnage models in the industry;

2. The boom box design increases reliability, the bucket optimizes the structure, and the service life is effectively improved;

3. Working devices such as breaker hammers and narrow buckets can be configured to adapt to different working scenarios.

Technical specifications	unit	parameters
Working quality	(T)	13
bucket capacity	(m³)	0.53
Engine model		QSF3.8T3TC115
Power	（kw/r/min）	86/2200
engine capacity	(L)	3.8
Number of engine cylinders		4
Engine emission standards		National Standard III
Whether it complies with national environmental protection certification		conform
Fuel tank capacity	(L)	247
Walking speed (high/low)	(km/h)	5.3/3.1
Swing speed	(r/min)	12.6
Climbing ability	(°)	35
Bucket excavation force	(KN)	80
Arm digging force	(KN)	64
Ground specific voltage	(Kpa)	38
Traction force	(KN)	86
Hydraulic pump model		K7V63DT
Max displacement	(L/min)	128*2
Working pressure	(MPa)	34.3/37.3
Hydraulic tank volume	(L)	130

Overall size（mm）	SC130.9
A - Total length	7576
B - Overall width	2490
C-total height (boom top)	2780
D-Overall height (top of cab)	2813
E-counterweight ground clearance	870
F - Minimum ground clearance	433
G-Tail turning radius	2015
H - Track grounding length	2750
J-Track length	3486
K-Rail guage	1960
L-Track width	2460
M - Track shoe width	500
N-Turntable width	2490
Arm length	2500
Boom length	4600

Scope of work（mm）	SC130.9
O - Maximum excavation height	8630
P - Maximum unloading height	6180
Q - Maximum excavation depth	5501
R-Maximum vertical wall excavation depth	4940
S-Maximum excavation distance of 2.5m horizontal surface	5287
T - Maximum excavation distance	8309
U - Maximum excavation distance on the ground	8180
V - Minimum turning radius	2495
W - Maximum height at minimum turning radius	6433
X - Distance from the center of rotation to the rear end	2015
Y - Track tooth thickness	25
Z-Counterweight height	1935
A1- Grounding length (during transportation)	4402

Note: As products are constantly upgraded, Lishide will modify and adjust the product technical parameters, configuration and other information at any time without notice; therefore, this information is for reference only, and the product configuration, appearance, technical parameters, etc. shall prevail in kind.