SC210.8SD Excavators for river dredging
Strong power
The whole machine adopts Cummins 6BTAA5.9 engine with a power of 133kW and sufficient power; the engine has fast transient response; Cummins original exhaust gas treatment system, high-precision control logic and high system conversion efficiency;
Efficient operation
The main pump has large displacement, high efficiency and sensitive response; the large diameter main valve has low back pressure, small impact and good coordination;
Reliable and durable
1. The rotary platform adopts a rigid box structure as a whole, and the main body adopts an I-beam rigid structure and is robot welded to improve the reliability and durability and the turntable's ability to resist external impacts.
2. Boom and stick, after combining market feedback and overall simulation analysis, the rear support of the boom and the horse head pin of the stick are thickened to disperse stress and improve service life.
Comfort and safety
The front glass of the cab is equipped with a sunshade as standard. When the sun is shining directly, the sunshade can be pulled down to avoid strong light and high temperatures.
Convenient maintenance
The oil filter, fuel filter, oil-water separator, air filter, and pilot filter are all located where they can be inspected and replaced on the ground.
They are within easy reach and are easy to maintain, saving maintenance time and improving work efficiency.
Optional parts: Crushing pipelines, cab ceiling lights, breaker hammers, etc. can be optionally installed to broaden the application field of the machine.
Construction Scenarios:
|
Technical specifications |
unit |
parameters |
|
Working quality |
T |
27 |
|
bucket capacity |
m3 |
0.35 |
|
Engine model |
CUMMINS 6BTAA5.9 |
|
|
Power |
kw/r/min |
133/2000 |
|
Volume of fuel tank |
L |
|
|
Maximum walking speed |
km/h |
4.4 |
|
Swing speed |
r/min |
11.7 |
|
Climbing ability |
° |
30 |
|
Bucket excavation force |
KN |
60 |
|
Arm digging force (KN) |
KN |
75 |
|
Ground specific voltage |
Kpa |
18 |
|
Traction force |
kN |
260 |
|
Hydraulic pump model |
K3V112DT |
|
|
Max displacement |
L/min |
200*2 |
|
Working pressure |
Mpa |
34.3 |
|
Hydraulic tank volume |
L |
350 |
|
A - Total length |
mm |
13130 |
|
B - Overall width |
mm |
5251 |
|
C-total height (boom top) |
mm |
3810 |
|
D-Overall height(tope of cab) |
mm |
3885 |
|
E-counterweight ground clearance |
mm |
2007 |
|
F - Minimum ground clearance |
mm |
1196 |
|
G-Tail swing radius |
mm |
2720 |
|
H - Track grounding length |
mm |
4325 |
|
J-Track length |
mm |
8134 |
|
K-Rail guage |
mm |
3653 |
|
L-Track width |
mm |
|
|
M - Track shoe width |
mm |
1282 |
|
N-Turntable width |
mm |
2700 |
|
O - Maximum excavation height |
mm |
13470 |
|
P - Maximum unloading height |
mm |
11400 |
|
Q - Maximum excavation depth |
mm |
10660 |
|
R-Maximum vertical wall excavation depth |
mm |
9350 |
|
T - Maximum excavation distance |
mm |
15277 |
|
U - Maximum excavation distance on the ground |
mm |
15010 |
|
V - Minimum turning radius |
mm |
5356 |
|
W - Maximum height at minimum turning radius |
mm |
10590 |
|
X - Distance from the center of rotation to the rear end |
mm |
2720 |
|
Arm length |
mm |
6356 |
|
Boom length( |
mm |
8260 |
Note: As products are constantly upgraded, Lishide will modify and adjust the product technical parameters, configuration and other information at any time without notice; therefore, this information is for reference only, and the product configuration, appearance, technical parameters, etc. shall prevail in kind.