SC210EV Energy-efficiency leader electric excavator
Environmental Protection
Adopted electric power drive, it is pollution-free and emission-free, which is the benchmark type product of green construction advocated by the state; there is no need to worry about the risk of purchasing the machine with the upward adjustment of the emission standard.
Economy
Compared with the same tonnage fuel excavator (each kilowatt-hour is calculated at 0.75 yuan / each liter of oil is calculated at 6 yuan), it can save 120,000-186,000 yuan per year according to the calculation of 8 hours a day, 25 days a month, ten months a year.
Efficient and Powerful
The power release speed of the motor is much higher than that of the fuel engine, so the electric excavator fundamentally improves the working efficiency of the excavator; the electric excavator is connected to the three-phase electricity, making the power no less explosive than that of the conventional excavator.
Less Failures
The motor has a maintenance cycle of about 5,000 hours and can operate 24 hours a day, with the 16 electric excavators currently placed at Hangzhou Terminal in China having reached 30,000 hours without failures. With electric drive, the cost of electricity is 67%-86% lower than that of fuel oil under the same operating conditions, which can extend the service life of the whole machine and reduce the maintenance cost.
Applicable to Various Working Conditions
SC210EV has a variety of wiring options. Scrap mills are mainly based on overhead lines with a range of activities of about 50-100 meters. If special needs are required, the overhead line program with a range of activities can be designed according to the working conditions.
Multiple Purposes
It can be equipped with hydraulic shears, log gripper, scrap steel gripper, electromagnetic suction, material gripper, lifting cab and other special configurations to solve the construction problems perfectly.
Low Noise
It overcomes the environmental pollution caused by the exhaust of the internal combustion engine under the working conditions, with zero emission, maintenance-free, and reduced working noise. The noise is 10dB lower than that of the same type of excavator, which is more environmentally friendly.
Key Configuration (tables may not be used for translation)
Construction Scenarios:
| Technical specifications | parameters |
| Working quality（T） | 21.5 |
| bucket capacity(m3) | 0.9-1.2 |
| Motor model | YVF2-250M-4 |
| Power (kw/r/min) | 55/1480 |
| Rated voltage（v） | 380 |
| Walking speed (high/low)(km/h) | 4.5/2.5 |
| Swing speed(r/min) | 8.7 |
| Climbing ability(°) | 35 |
| Bucket excavation force(KN) ISO | 147.9 |
| Arm digging force (KN) ISO | 107.3 |
| Ground specific voltage (KPa) | 50.8 |
| Traction force （kN) | 223 |
| Hydraulic pump model | K3V112DT-1 |
| Max displacement（L/min) | 210*2 |
| Working pressure (MPa) | 34.3 |
| Hydraulic tank volume (L) | 230 |
| A - Total length (mm) | 9535 |
| B - Overall width (mm) | 2780 |
| C-total height (boom top) (mm) | 3140 |
| D-Overall height (top of cab) (mm) | 3090 |
| E-counterweight ground clearance (mm) | 1080 |
| F - Minimum ground clearance (mm) | 470 |
| G-Tail turning radius (mm) | 2800 |
| H - Track grounding length (mm) | 3260 |
| J-Track length (mm) | 4070 |
| K-Rail guage (mm) | 2180 |
| L-Track width (mm) | 2780 |
| M - Track shoe width (mm) | 600 |
| N-Turntable width (mm) | 2700 |
| O - Maximum excavation height (mm) | 9270 |
| P - Maximum unloading height (mm) | 6600 |
| Q - Maximum excavation depth (mm) | 6525 |
| R-Maximum vertical wall excavation depth(mm) | 5670 |
| S-Maximum excavation distance of 2.5m horizontal surface(mm) | 6327 |
| T - Maximum excavation distance (mm) | 9820 |
| U - Maximum excavation distance on the ground (mm) | 9630 |
| V - Minimum turning radius (mm) | 3800 |
| W - Maximum height at minimum turning radius (mm) | 7640 |
| X - Distance from the center of rotation to the rear end (mm) | 2800 |
| Y - Track tooth thickness (mm) | 26 |
| Z-Counterweight height (mm) | 2120 |
| A1- Grounding length (during transportation) (mm) | 4970 |
| Arm length(mm) | 2900 |
| Boom length(mm) | 5700 |
Note: As products are constantly upgraded, Lishide will modify and adjust the product technical parameters, configuration and other information at any time without notice; therefore, this information is for reference only, and the product configuration, appearance, technical parameters, etc. shall prevail in kind.