SC220.8Forestry Excavator

SC220.8 is a forestry excavator built by Lishide Company, designed for harsh forestry work. The key hydraulic parts adopt Kawasaki negative flow hydraulic system, which is suitable for various working conditions such as earthwork excavation and logging. It can provide customers with the most expected high productivity and durability in the tough forestry operation site.

Model: SC220.8 Forestry Excavator
Engine power: 150Kw/2050rpm;
Machine weight: 21.5T;
Bucket capacity: 0.93m³ (optional 0.9-1.1)
Main title Built for Harsh Forestry Work!

Product selling points

The Main Parameters

Product selling points

Energy saving, low consumption, ultra-high efficiency

Adopts 150KW Cummins engine, powerful power; matched with Korean Kawasaki 125 main pump, large displacement, can meet the power and flow requirements of customers equipped with a variety of logging accessories；

High-strength components-heavy-load reinforcement design of structural parts1. The structural parts adopt heavy-duty reinforced design, which increases the load-bearing capacity by 15% compared with the same tonnage models in the industry;

2. SC220.8 is equipped with a 0.93m³ rock super-strong bucket as standard, and the main blade adopts wear-resistant plate. Optional 0.9-1.1m³ earthwork bucket and other buckets of various specifications can be equipped, and various types of attachments such as wood grab bucket, breaker hammer, loosening bucket can be installed to meet the needs of various working conditions;

3. Rock arm, hydraulic shear and other working devices can be configured to adapt to special working scenes；

4. Add protective devices on both sides of the turntable to prevent trees from damaging the excavator cover;

5. The bottom sealing plate and travel motor guard plate are reinforced and thickened to effectively protect the internal components；

Comfortable operation and humanized design

1. The newly designed cab can be equipped with full protection, large space and high safety. The sealing is 70% higher than that of the same level, effectively isolating dust and greatly reducing the noise in the cab.

2. The cab has a novel appearance, comfortable operation, wide field of vision, intelligent and humanized design;

3. The cab can be equipped with a falling object guard (FOG) and a falling object protection suit (FOPS), so that the operator can operate the machine with confidence in harsh working environments;

4. Machine monitoring is simple and easy, and the GPS monitoring program can realize remote monitoring and diagnosis, allowing customers to understand the machine's operation, productivity, fuel consumption and other information in real time, thereby maximizing normal operation time;

The whole machine has beautiful shape and humanized design, which is easy to repair and maintain

1. The oil filter and oil filter are concentrated on the door side, and the air filter is carefully selected, which is easy for daily maintenance and filter element replacement;

2. The air filter is carefully selected, which is easy for daily maintenance and filter element replacement.

The main parameters

Technical specifications	unit	parameters
Working quality	(T)	24
bucket capacity	(m³)	0.93
Engine model		QSB7
Power	（kw/r/min）	150/2050
engine capacity	(L)	6.7
Number of engine cylinders		6
Engine emission standards		National Standard Ⅲ
Whether it complies with national environmental protection certification		conform
Is it necessary to add urea?		Unnecessary
Fuel tank capacity	(L)	350
Walking speed (high/low)	(km/h)	5.5/3.2
Swing speed	(r/min)	11.7
Climbing ability	(°)	35
Bucket excavation force	(KN)	138
Arm digging force	(KN)	99
Ground specific voltage	(Kpa)	54
Traction force	(KN)	174
Hydraulic pump model		K7V125
Max displacement	(L/min)	256*2
Working pressure	(MPa)	34.3/37.3
Hydraulic tank volume	(L)	306

Overall size（mm）	SC220.8
A - Total length	9390
B - Overall width	3199
C-total height (boom top)	3040（standard configuration）
D-Overall height (top of cab)	3114
E-counterweight ground clearance	1065
F - Minimum ground clearance	468
G-Tail turning radius	2720
H - Track grounding length	3635
J-Track length	4446
K-Rail guage	2180
L-Track width	2880
M - Track shoe width	600
N-Turntable width	3199
Arm length	2900（standard configuration）
Boom length	5700（standard configuration）

Scope of work（mm）	SC220.8
O - Maximum excavation height	9278
P - Maximum unloading height	6560
Q - Maximum excavation depth	6515
R-Maximum vertical wall excavation depth	5915
S-Maximum excavation distance of 2.5m horizontal surface	6370
T - Maximum excavation distance	9867
U - Maximum excavation distance on the ground	9680
V - Minimum turning radius	3630
W - Maximum height at minimum turning radius	7616
X - Distance from the center of rotation to the rear end	2720
Y - Track tooth thickness	26
Z-Counterweight height	2045
A1- Grounding length (during transportation)	4940

Note: As products are constantly upgraded, Lishide will modify and adjust the product technical parameters, configuration and other information at any time without notice; therefore, this information is for reference only, and the product configuration, appearance, technical parameters, etc. shall prevail in kind.

Technical specifications	unit	parameters
Working quality	(T)	47
bucket capacity	(m³)	2.3
Engine model		QSM11
Power	（kw/r/min）	280/2100
engine capacity	(L)	10.8
Number of engine cylinders		6
Engine emission standards		National Standard III
Whether it complies with national environmental protection certification		conform
Fuel tank capacity	(L)	650
Walking speed (high/low)	(km/h)	4.9/2.7
Swing speed	(r/min)	8.9
Climbing ability	(°)	35
Bucket excavation force	(KN)	256
Arm digging force	(KN)	212
Ground specific pressure	(Kpa)	88.5
Traction force	(KN)	368
Hydraulic pump model		K5V200DT/AP4VO200DT
Max displacement	(L/min)	360*2
Working pressure	(MPa)	34.3
Hydraulic tank volume	(L)	335

Overall size（mm）	SC485.9
A - Total length	12260
B - Overall width	3490
C-total height (boom top)	3755
D-Overall height (top of cab)	3280
E-counterweight ground clearance	1269
F - Minimum ground clearance	722
G-Tail turning radius	3735
H - Track grounding length	4360
J-Track length	5390
K-Rail guage	2890
L-Track width	3490
M - Track shoe width	600
N-Turntable width	3045
Arm length	2900
Boom length	7060

Scope of work（mm）	SC485.9
O - Maximum excavation height	10680
P - Maximum unloading height	7428
Q - Maximum excavation depth	7300
T - Maximum excavation distance	11540
U - Maximum excavation distance on the ground	11325
V - Minimum turning radius	5015
W - Maximum height at minimum turning radius	9295
X - Distance from the center of rotation to the rear end	3735
Y - Track tooth thickness	36
Z-Counterweight height	2830
A1- Grounding length (during transportation)	7590

Online Inquiry

Your Name*

E-mail*

Phone Number

Country

Remarks*

BY ENTERING YOUR E-MAIL ADDRESS YOU ACCEPT INJET PRIVACY POLICY

rest