SC240.9 Excavator specially designed for earthwork (3).jpg

SC240.9 Excavator specially designed for earthwork (1).jpg

SC240.9 Excavator specially designed for earthwork (4).jpg

SC240.9 Excavator specially designed for earthwork (5).jpg

SC240.9 Excavator specially designed for earthwork (2).jpg

SC240.9 Excavator specially designed for earthwork

SC240.9 key hydraulic parts adopt CCHC negative flow system, which is suitable for various working conditions such as earthwork excavation.

Model: SC240.9
Engine power: 140KW/2050rpm
Machine weight: 24.22T
Bucket capacity: 1.1m³

Product selling points

The Main Parameters

Product selling points

Energy saving, low consumption, ultra-high efficiency

High-strength components-heavy-load reinforced design of structural parts

1. The structural parts are subjected to finite element analysis and heavy-duty reinforced design, which increases the load-bearing capacity by 15% compared with the same tonnage models in the industry;

2. SC240.9 is equipped with a 1.1m³ bucket as standard, and can be equipped with buckets of various specifications such as 0.8-1.2m³. It can be equipped with various types of attachments such as ripper, breaker, ripper bucket, etc. to meet the needs of various working conditions;

3. It can be equipped with working devices such as rock arm and hydraulic shear to adapt to working scenes with special needs;

Comfortable control and humanized design

1. The newly designed positive pressure cab is equipped with full protection as standard, with large space and high safety. The sealing is 70% higher than that of the same level, effectively isolating dust and greatly reducing the noise in the cab;

2. The cab has a novel appearance, comfortable operation, wide field of vision, intelligent and humanized design;

3. The cab can be equipped with an anti-falling object protection frame and anti-falling object protection equipment, so that the operator can operate the machine with confidence in harsh working environments;

Convenient and fast maintenance

1. The oil filter and oil filter are concentrated on the door side, which is convenient for maintenance and replacement；

2. Selected air filters are easy for daily maintenance and filter element replacement.

Technical specifications	unit	parameters
Working quality	(T)	24.22
bucket capacity	(m³)	1.2
Engine model		Guangkang CUMMINS QSB7
Power	（kw/r/min）	140/2050
engine capacity	(L)	6.7
Number of engine cylinders		6
Engine emission standards		National Standard III
Whether it complies with national environmental protection certification		conform
Is it necessary to add urea?		Unnecessary
Fuel tank capacity	(L)	350
Walking speed (high/low)	(km/h)	5.69/3.86
Swing speed	(r/min)	12.8
Climbing ability	(°)	35
Bucket excavation force	(KN)	159
Arm digging force	(KN)	115
Ground specific voltage	(Kpa)	48.6
Traction force	(KN)	174
Hydraulic pump model		AP4VO140
Max displacement	(L/min)	252*2
Working pressure	(MPa)	34.3
Hydraulic tank volume	(L)	246

Overall size（mm）	SC240.9
A - Total length	9740
B - Overall width	2980
C-total height (boom top)	3190
D-Overall height (top of cab)	3120
E-counterweight ground clearance	1065
F - Minimum ground clearance	442
G-Tail turning radius	2810
H - Track grounding length	3640
J-Track length	4450
K-Rail guage	2380
L-Track width	2980
M - Track shoe width	600
N-Turntable width	2700
Arm length	3050
Boom length	5850

Scope of work（mm）	SC240.9
O - Maximum excavation height	9310
P - Maximum unloading height	6438
Q - Maximum excavation depth	6875
R-Maximum vertical wall excavation depth	5860
S-Maximum excavation distance of 2.5m horizontal surface	6680
T - Maximum excavation distance	10170
U - Maximum excavation distance on the ground	9990
V - Minimum turning radius	3975
W - Maximum height at minimum turning radius	7775
X - Distance from the center of rotation to the rear end	2810
Y - Track tooth thickness	26
Z-Counterweight height	2120
A1- Grounding length (during transportation)	5165

Note: As products are constantly upgraded, Lishide will modify and adjust the product technical parameters, configuration and other information at any time without notice; therefore, this information is for reference only, and the product configuration, appearance, technical parameters, etc. shall prevail in kind.